Login to view prices
SKU: 9321886014549 Categories: , Tag:

The AVT2 is a compact 4G GPS tracking device with a variety of inputs and outputs to cater for the most demanding applications. The 4G modem allows for operation on both Cat-M1 and NB-IoT networks. Its rugged housing is IP67 rated to withstand the harshest environments, without sacrificing tracking and communications performance. With the internal GPS and cellular antennas, installationis a breeze. The internal backup battery provides alerts and tracking operations even when external power is removed.


Rugged Weatherproof GPS Tracking Device – Wired

– Network Type 4G LTE
– Cellular Antenna: Internal
– APN: Auto APN details preloaded

– GPS Antenna: Internal
– GPS Tracking: High Sensitivity with 72CH TCXO
– GPS Amplifier: Low Noise GPS Signal Booster (LNA)

Smart Technology
– Ignition Detect: Wired ignition voltage on/off. Emulated ignition with GPS movement.
Run detection when voltage increases
– Accident Detect: Built in accelerometer detects high G-force impact in accidents or rollovers and reports the event to the server for emergency alerting.
– Accident Data: Stores second by second recording of GPS & accelerometer data for 2 hour window. Data can be uploaded to the server when an accident is detected
or can be done manually by request.
– Logging Parameters: Can be configured to log information based on the following parameters:
• Harsh driving (accelerometer)
• Distance travelled
• Change of direction
• Change of speed
• Time elapsed
• On but stationary
– Harsh Driving: Using the 3-axis accelerometer to detect:
• Excessive acceleration
• Cornering speed
• Harsh braking
– TXT Setup: Remote setup of the APN server and other details via TXT
– Geo-Fencing: Capacity to remotely set & store hundreds of geo-fencing:
• No Go & Keep out areas
• Arrival & Depature alerts
• Automatic Output Controls. e.g. switch on hazard lights
• Speeding Zones with Audible Alert

Inputs & Outputs
– Digital Inputs: 1 x Ignition (permanent internal pull down 0-50V)
2 x Digital (configuarable internal pull down 0-50V)
– Analogue Inputs: 1 x 0-30V (shared with Digital input. i.e. only one can be used at a time)
– iButton: 1 Wire iButton reader for Driver-ID
– Digital Outputs: 1 x Switched Ground, ideal for external lights, relays, buzzers etc. (shared with Analogue input. i.e. only one can be used at a time)

– Off Line Assist Now Offline data aid & extremely fast performance
– Memory: Internal with over 50,000 records while off line
– Battery: 1100mAh LiPo

– Vehicle: 8-36V DC
– Fuse: Self Re-setting Fuse. Passes stringent automotive power “load dump” tests

– Operating Temperature: -20° to +60°C, Note: Will not charge the internal battery below 0° and over 40°C
– Harness: 7 Wire
– Dimensions: 125L x 80W x 25H mm

There are no reviews yet.

Be the first to review “AVT2”